Controls
Controls and engine systems vary greatly from one engine manufacturer to another. Please read your
engine owner’s manual carefully.
Note: If your engine package was
not factory installed
, some components that are
normally standard installations may not be included.
Throttle and Shift Controls
Ignition – Binnacle, Forward, Neutral and Reverse Gear Operation
The binnacle on the 25 Walk is located at the console forward of the helm seat. To ensure that the
binnacle is working properly, shift the binnacle forward to put the engine in forward gear. Make sure the
engine shifts smoothly into idle with no grinding of the gears. Bring the binnacle back into neutral and
repeat the same process while going into reverse. Again, ensure that there are no gears grinding. It is
important to check the binnacle at wide-open throttle (WOT) to ensure the binnacle is not stiff and
operates smoothly while going into the WOT position.
Actual binnacle will vary depending upon the engine package that was selected.
lectronic Throttle and Shift Controls (Optional)
pti Max DTS, etc.) include electronic throttle &
ey Switch Alarm
is located in the binnacle and sounds when the ignition key is turned on. The key
E
Some engine packages (i.e., Mercury Verado, Mercury O
shift controls. This feature is also available as an option for all other engine packages. The electronic
throttle & shift controls provide easier shift and throttle functions and little or no resistance. You may
occasionally feel some friction at the binnacle but this can be adjusted at the binnacle per the instructions
provided by the engine manufacturer.
K
The key switch alarm
switch alarm is actually is a warning alarm that goes off when any overheating problems may occur with
the engine. To check the key switch alarm, turn the ignition key to the right but do not start the engine.
The alarm will sound ensuring that the engine warning alarm is working properly. When finished, turn the
key off.
11
