1
Unpack all items from accessory bag.
3
Remove dust cover carton from the box.
4
Remove the protection covering.
6
7
Unpack the power supply.
8
Unpack the platter.
9
Put the drive belt on the pulley
& sub-platter.
10
11
T1 Setup Guide
Please read before unpacking.
Getting started:
• Make sure to have enough space to unpack your turntable.
• Always unpack and setup in a clean enviroment.
• Important for warranty: Do not throw packaging away.
• Setup is demonstrated with T1 Phono SB.
2
Lift the wrapped turntable
out of the box.
5
Put the platter on the turntable.
a) Connect it E (RCA cable)
Detachable cable only included with T1 Phono SB & T1 BT
b) Drive belt
c) Stylus pressure gauge
d) Adapter for 7“ singles
a)
b)
c)
d)
T1
>
>
T1 Phono SB
T1 BT
Connect to any amp with integrated phono amplifier or use an
external phono preamp.
Pre-mounted Connect it E (RCA cable) included.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject MaiA S2 (stereo integrated amplifier).
Select
Line Out
to connect to an amplifier without a phono
stage. Select
Phono Out
if you have an amplifier with a phono
stage.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Select
Line Out
to connect to an amplifier without a phono
stage. Select
Phono Out
if you have an amplifier with a phono
stage. Enjoy the warmth of vinyl with the comfort of wireless
technology.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Speaker cable
Speaker cable
Connect it E (RCA Cable)
Speaker cable
Speaker cable
Connect it E (RCA Cable)
Put the felt mat on the platter.
Remove tonearm twist tie.
Connect to your hifi-system
and enjoy your music!
Speaker cable
Speaker cable
Connect it E (RCA Cable)
Speed Change:
Small pulley 33 RPM
Large pulley 45 RPM
T1 Phono SB: Speed Selector 33/45
Beware of breaking the needle!
