5
ASSEMBLY
Assembly requires two persons.
Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the
included tools, assembly requires a Phillips screwdriver
, an adjustable
wrench
, and a rubber mallet
.
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly.
Note: Some small parts may have
been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M10 x 128mm Patch Screw (83)–2
M4 x 14mm
Screw (104)–8
M8 Jamnut
(79)–5
M8 Washer
(88)–6
Wave Washer
(111)–2
M8 x 23mm Patch
Screw (84)–4
M8 Split Washer
(90)–3
M8 x 41mm Button
Bolt (78)–4
M4 x 16mm
Round Head
Screw
(101)–14
M4 x 32mm Round
Head Screw
(105)–6
M4 x 45mm Screw
(108)–2
M8 x 23mm Shoulder
Patch Screw (115)–4
M8 x 70mm Button
Bolt (80)–1
M10 x 82mm Patch Screw
(82)–2
Hub Patch Screw
(87)–8
Star Washer
(112)–8
Transport Handle
Screw (97)–4
Bearing Spacer
(113)–4
