12
Next, hold the chest pulse sensor near the con-
sole. While holding one thumb stationary, begin
tapping the other thumb against the electrode area
at a rate of about one tap per second. Check the
heart rate reading on the console.
•
If the chest pulse sensor does not function proper-
ly after you have followed all of the above instruc-
tions, the battery should be replaced in the follow-
ing way:
Locate the battery
cover on the back of
the sensor unit.
Insert a coin into the
slot in the cover,
turn the cover coun-
terclockwise, and
remove the cover.
Remove the old
battery and insert a
new CR 2032 bat-
tery.
Make sure
that the battery is
turned so the
writing is on top.
Replace the bat-
tery cover and turn
it clockwise to
close it.
CHEST PULSE SENSOR CARE
•
Thoroughly dry the chest pulse sensor after each
use. The chest pulse sensor is activated when the
electrode areas are wetted and the chest pulse
sensor is put on; the chest pulse sensor shuts off
when it is removed and the electrode areas are
dried. If the chest pulse sensor is not dried after
each use, it may remain activated longer than nec-
essary, draining the battery prematurely.
•
Store the chest pulse sensor in a warm, dry place.
Do not store the chest pulse sensor in a plastic
bag or other container that may trap moisture.
•
Do not expose the chest pulse sensor to direct
sunlight for extended periods of time. Do not
expose the chest pulse sensor to temperatures
above 122° Fahrenheit (50° Celsius) or below 14°
Fahrenheit
(-10° Celsius).
•
Do not excessively bend or stretch the sensor unit
when using or storing the chest pulse sensor.
•
Clean the sensor unit using a damp cloth—never
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.
CR 2032
Battery
