18
Inspect and tighten all parts of the exercise bike regu-
larly. Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild soap.
IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
If the console display becomes dim, or if the audio
from the sound system stops intermittently, replace all
the batteries at the same time; most console problems
are the result of low batteries. See assembly step 5 on
page 8 for replacement instructions.
Note: If you use the sound system regularly, it is rec-
ommended that you purchase an optional
manufacturer-supplied power adapter (see assembly
step 5 on page 8).
If the handgrip pulse sensor does not function prop-
erly, see step 5 on page 15.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed switch, you must first remove the
left pedal and the left front shield. Using an adjustable
wrench, turn the left pedal clockwise and remove it.
Next, remove all the screws from the left and right
front shields;
there are two sizes of screws in the
front shields–note which size of screw you remove
from each hole.
Then, gently pull the left front shield
away from the frame.
Locate the Reed Switch (46). Turn the Pulley (29) until
a Magnet (30) is aligned with the Reed Switch. Next,
loosen, but do not remove, the indicated M4 x 16mm
Screw (57).
Slide the Reed Switch (46) slightly closer to or away
from the Magnet (30), and then retighten the M4 x
16mm Screw (57). Turn the Pulley (29) for a moment.
Repeat these actions until the console displays correct
feedback. When the reed switch is correctly adjusted,
reattach the front shields and the left pedal.
MAINTENANCE AND TROUBLESHOOTING
46 57
29
30
All manuals and user guides at all-guides.com
