Pro-face Xycom 3015, Руководство по оборудованию

Страница: 30 / 44

Compatible aliphatics, alcohols, and halogenated hydrocarbons should be used only
for wiping or short-term immersion (less than 10 minutes). If parts are in complete im-
mersion, remove all traces of solvent by forced-air drying or rinsing in hot water.
Noncompatible, Detrimental Cleaning Agents
Type Agents
Bases 25% Ammonium Hydroxide, 10% Potassium Hydroxide,
Sodium Hydroxide
Organic Solvents Lacquer Thinner, Toluene, Methyl Cellosolve, Methylethylketone
PRODUCT REPAIR PROGRAM
Xycom Automation’s Product Repair and Customization Department (PR&C) restores
equipment to normal operating condition, and implements engineering changes that
enhance operating specifications. Returned products are tested with standard Xycom
Automation test diagnostics.
To prepare the unit for shipment
1.
Obtain an RMA number for your unit by calling your nearest Xycom Automation
Repair Department or Xycom Automation, Inc. at 1-800-289-9266 or 734-429-4971.
Please have the following information available:
•
Company name and shipping and billing addresses
•
Type of service desired: product repair or product exchange
•
Product model number, part number, quantity, serial number(s), and warranty status
•
Failure mode and failure systems
•
Purchase order number or repair order number
2.
Make sure the front panel assembly is properly attached to the unit.
3.
Attach failure information to the unit to speed processing.
4.
Place the unit securely in its original packaging or an equivalent heavy-duty box.
5.
Mark the RMA number on your purchase order and on the outside of the box.
6.
Send the unit to the address given when you receive your RMA number.
Maintenance 26