Pro-face PL-DU6900, Руководство пользователя

Страница: 36 / 51

4-5
Chapter 4 - Installation and Wiring
PL-DU6900/PL-DU7900 User Manual
4.3 Wiring Cautions
4.3.1 Connecting to PL
4.3.2 Connecting the Power Cord
After connecting the DU to the PL-B900 Series unit and setting up the PL's OS,
you will need to complete the DU's screen settings and touch panel calibration.
For details, refer to BOX-Type Industrial Computer PL-B900/
B910 Series Users Manual.
(Rear View)
Power Input Terminals
Connecting these two terminals pro-
vides AC100V to 240V power.
L= Live and N= Neutral
This terminal is connected to the
DU’s frame (chassis).
(screw size: M3)
PL-DU6900
1) Confirm that the DU’s power switch is
turned OFF. Then, remove the power
terminal’s transparent plastic cover.
• To prevent electric shocks, be sure to turn the DU OFF
before connecting the power cord.
• To prevent fires, electrical hazards and equipment dam-
age, be sure to use only the specified power supply volt-
age when operating the DU.
Use the following steps when connecting the power cord to the DU’s power terminals.
POWER
I
o
I:ON
o:OFF
Power Terminals
Power Switch
L
N
FG
FG
L
N
Screws
Transparent Cover
WARNINGS