Pro-face PL-DU6900, Руководство пользователя

Страница: 25 / 51

Unit: mm <in.>
2.4.3 PL-DU6900 Installation Fasteners
4-R2 or less
• Be sure the thickness of the panel is from 1.6mm (0.06in.) to
10mm (0.39 in.)
• Depending on material used for panel surface, you may need to
strengthen the panel surface. Especially, if high levels of vibration
are expected and the DU’s installation surface (i.e. an operation
panel’s door, etc.) can move (i.e. open or close) due consideration
should be given to the DU’s weight.
• To insure that the DU’s water resistance is maintained, be sure to
install the DU into a panel that is flat and free of scratches or dents.
• Be sure all installation tolerances are maintained to prevent the unit from
falling out of its installation panel, or allowing water to enter inside.
• Be sure the thickness of the panel is from 1.6mm (0.06in.) to
10mm (0.39 in.)
• Depending on material used for panel surface, you may need to
strengthen the panel surface. Especially, if high levels of vibrtion
are expected and the DU’s installation surface (i.e. an operation
panel’s door, etc.) can move (i.e. open or close) due consideration
should be given to the DU’s weight.
• To insure that the DU’s water resistance is maintained, be sure to
install the DU into a panel that is flat and free of scratches or dents.
• Be sure all installation tolerances are maintained to prevent the unit from
falling out of its installation panel, or allowing water to enter inside.
2.4.4 PL-DU7900 Installation Fasteners
Unit: mm <in.>
4-R2 or less
331 <13.03 >
+0.5
0
+0.02
0
272 <10.71 >
+0.5 0
+0.02
0
360 <14.17 >
+0.5
0
+0.02
0
3
1
1 12.24 >
+0.5 0
+0.02
0