Pro-face PL-DU6900, Руководство пользователя

Страница: 23 / 51

Chapter 2 - Specifications
2-4
PL-DU6900/PL-DU7900 User Manual
A: Display Area
Display output area.
B:Touch Panel
A high resolution analog type touch panel.
Allows you to create your control systems
without using a key board.
C:Status LED
The status of the lamp changes according to
the alarm type detected by the RAS feature.
BOX-Type Industrial Com-
puter PL-B900/B910 Series Users Manual
D: Front Maintenance Cover
Open this cover when using the Hardware
Reset Switch.
E: IrDA
This feature is currently unavailable.
F: (This feature is unavailable with DU)
G: Hardware Reset Switch
Resets the Display Unit only.
H: Brightness Adjustment Slide
Allows adjustment of backlight brightness.
(Can be used for PL-DU7900 only.)
I: Power Switch
Turns ON/OFF the DU’s power supply.
J : Power Terminals
The DU’s AC100V/240V power cord termi-
nals are connected here.
K: USB Connector
USB I/F, (USB 1.0 compatible.) Any other
USB connection compatible units can be
connected here.
L: PL Connector
The communication interface for PL-B900/PL-
B910. To use this connector, the optional unit
PL-CB200-10M is required.
M: Dip Switch
Used for setting the Touch Panel Communication
method (RS-422/USB) and station (ID) numbers.
1.1.1 RS-422 and USB
Connections Dip Switch Settings
N: Display Stand
Used to support the DU when it is removed
from its installation panel.
2.3 Names and Functions of DU Parts
D
E
C
I
M
N
J
PL-DU6900 Side View
J
I
K
PL-DU6900 Rear View
PL-DU6900
<Inside the Front Maintenance Cover>
<Inside the Front Maintenance Cover>
A,B
PL-DU7900
PL-DU6900 Bottom View
K
F G
F G H
L
L M