Pro-face PL-6930-T41, Руководство пользователя

Страница: 60 / 175

Chapter 3 Peripheral Device Installation
3-9
3.1.5 Connecting a CD-ROM drive unit
„
PL-6930 / PL-7930(4-Slot Type)
(1) Unscrew the two(2) attachment screws on the IDE cover, and then remove the cover.
(2) Unscrew two (2) attachment screws of the Expansion Slot1 and then remove the cover.
(3) Secure the attachment bracket for the rear face to the PL unit using the two (2) attachment screws.
The torque should be 0.5 to 0.6N•m.
• If you want to use the HDD/CF card unit in the “Expansion Slot1” together with
the CD-ROM drive unit, the setting of the HDD/CF card unit must be “Master” (as
the first disk). To do failure so, it may cause malfunction. Please refer to the
Chapter 3 Uninstalling / Installing HDD units / CF card units (page3-6)
IDE cover
Expansion Slot1 cover
Attachment Bracket for the Rear Face