Pro-face PL-6930-T41, Руководство пользователя

Страница: 143 / 175

PL-6930 / PL-7930 Series User Manual
7-18
7.4.2 Setting Up the Client PL
(1) Start the [System Monitor Property] -> [Control Panel].
(2) On the [Remote RAS] tab, put a check mark in the [Enable] checkbox.
The Remote RAS feature is now enabled.
*1 When 2 or more IP Addresses are allocated to the PL unit, the [Auto] cannot be selected. Enter settings
that allow the reading of a fixed IP Address from a DHCP server. For details, contact your company’s
network administrator for getting the detailed information.
• In order to actually activate the Remote RAS feature, you are required to start up the System
Monitor (SystemMonitor.exe) within the PL.
Set the IP Address used
to connect with Pro-
Server*
1
This feature designates
that the PL will communi-
cate only with the server at
the specified IP address.
Specify the IP
address of the
server you want to
communicate with.
Put check marks
in the item boxes
you want to
monitor.