Pro-face PL-5900 Series, Руководство пользователя

Страница: 24 / 145

Chapter 2 - Specifications
2-7
PL-5900 Series User Manual
2.3.4 RS-232C Interface (COM1/COM2/COM3)
Screw Size: (4-40UNC): Inch Type
5 4 3 2 1
9 8 7 6
The GND terminal is the signal ground. Be sure to connect it with the
cable’s opposite side SG terminal.
D-sub 9 pin (Male)
Pin No.
Signal
Name
Pin No.
Signal
Name
1
CD
6
DSR
2
RXD
7
RTS
3
TXD
8
CTS
4
DTR
9
RI/+5V
5
GND
6
4
2
1
3
5
Mini - DIN 6 pin (Female)
2.3.3 Mouse Interface(MOUSE)
Pin No. Signal Name
1 Mouse DATA
2 NC
3 GND
4 +5V
5 Mouse CLK
6 NC
SHIELD GND
No. 9 pin (RI/+5V) is used by COM2 and COM3 only. If COM1 is used, the pin
becomes RI. The changeover from RI to +5V is set via the PL side face slide
switch.
2.4 PL Part Names and Features
Be sure to confirm what settings will be used by the other device and
set the dip switches accordingly. Failure to do so can result in a unit
malfunction or damage.
Whenever changing the PL dip switches, be sure to first turn the PL’s
power supply OFF. Failure to do so can cause a PL malfunction.