Pro-face PL-5900 Series, Руководство пользователя

Страница: 20 / 145

Chapter 2 - Specifications
2-3
PL-5900 Series User Manual
2.1.3 Structural
*1 The front face of the PL unit, installed in a solid panel, has been tested using conditions
equivalent to the standard shown in this specification . However even though the PL
unit’s level of resistance is equivalent to the standard, oils that should have no effect on
the PL can possibly harm the unit. This can occur in areas where either vaporized oils
are present, or where low viscosity cutting oils are allowed to adhere to the face of the
unit for long periods of time. If the PL’s front face protection sheet becomes peeled off,
these conditions can lead to the ingress of oil into the PL and separate protection
measures are suggested. Also, if non-approved oils are present, it may cause deformation
or corrosion of the front panel’s plastic cover. Therefore, prior to installing the PL be
sure to confirm the type of conditions that will be present in the PL’s operating environ-
ment.
PL-5900T PL-5901T
Grounding
Rating
(Front face of installed unit)
Weight
6.0 kg (13.2 lb) or less 5.5 kg (12.1 lb) or less
Cooling Method
External Dimensions
W 311mm[12.24in.] x
H 271mm[10.67in.] x
D 130mm[5.12in.]
(excluding projections)
W 311mm[12.24in.] x
H 271mm[10.67in.] x
D 93mm[4.57in.]
(excluding projections)
Dimensions Including FDD Unit
W 311mm[12.24in.] x
H 271mm[10.67in.] x
D 130mm[5.12in.]
(excluding projections)
W 311mm[12.24in.] x
H 271mm[10.67in.] x
D 123mm[4.84in.]
(excluding projections)
Dimensions Including RS-
232C/RS-485 Conversion Unit
W 311mm[12.24in.] x
H 271mm[10.67in.] x
D 152mm[5.98in.]
(excluding projections)
W 311mm[12.24in.] x
H 271mm[10.67in.] x
D 115mm[4.53in.]
(excluding projections)
Exclusive grounding: Use your country’s applicable standard.
Equivalent to IP65f (JEM 1030)
*1
Natural air ventilation