Pro-face PL-5900 Series, Руководство пользователя

Страница: 14 / 145

1-1 PL-5900 Series User Manual
Chapter
1 PL Basics
1. Prior to Operating the PL
2. PL System Design
3. Optional Items
1.1 Prior to Operating the PL
- After completing the hardware setup, before any data or applications
can be installed on the hard disk drive, the OS (MS-DOS ® ) must be
used to initialize the HDD and create partitions. For details concern-
ing these procedures, refer to the OS maker’s installation manual.
- After turning the PL OFF, be sure to wait at least 5 seconds before
turning ON again. If the unit is stated within 5 seconds, it may not
start up correctly.
- The PL is designed for use with MS-DOS ® operating systems. Other
operating systems are not supported by this PL’s driver software.
Prior to actual use, be sure to setup your PL as follows.
Refer to 3.1.4 Removing/Installing the HDD
Unit
Turn PL ON
Refer to 4.3 Wiring the PL
Setup System
Refer to Chapter 5 System Setup
Refer to the OS maker’s Installation Manual.
Install the OS
Install the HDD
Unit