Pro-face FP5000 Series, Руководство пользователя

Страница: 92 / 95

Maintenance
92
Replacing the Installation Gasket
Introduction
The installation gasket provides protection against dust and moisture.
Installing the Installation Gasket
The gasket must be inserted correctly into the groove for moisture resistance for this product.
NOTICE
GASKET AGING

Inspect the gasket periodically as required by your operating environment to keep the initial IP
level.

Change the gasket at least once a year, or as soon as scratches or dirt become visible.
Failure to follow these instructions can result in equipment damage.
Step Action
1 Place this product on a flat, level surface, with the display face pointing down.
2 Remove the gasket from this product.
3 Attach the new gasket to this product. Insert the protrusions from the four
corners of the gasket into the corresponding holes in the corners of this
product.
NOTE: When using a tool to insert the gasket, make sure the tool does not
catch the rubber gasket and cause a tear.
1 Installation Gasket
2 Protruding point
CAUTION
EQUIPMENT DAMAGE
Since the gasket is flexible but not elastic, be careful not to stretch it unnecessarily.
Failure to follow these instructions can result in injury or equipment damage.