Pro-face FP-3710K Series, Руководство пользователя

Страница: 13 / 104

12
CE Marking
The FP-3710K Series are CE marked products complying with both the EMC Directive and low-voltage directive.
For the detailed information on CE Marked, be downloaded and refer the Declaration of Conformity from Pro-face Home
Page.
Home Page URL
http://www.pro-face.com/
FCC Statement
United States FCC Part 15, Subpart B, Class A EMI Compliance Statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his or her own expense.
About Revision
The nameplate on the FP has the revision number of the FP. In the example below, the asterisk, which is placed at the “A”
position, shows that the revision number is “A”.
When FP is Rev. A