16 / 29
3.3.
Receive screen data from GP3000 series
You can transfer data to GP3000 Series via;
A USB transfer cable (model: CA3-USBCB-01)
A CF card/USB storage device
Ethernet
If you have backed up screen data, this step is unnecessary, skip to the next
section [
3.4 Change the Display Unit Type
(1)
Connect your PC and GP3000 Series with a USB transfer cable.
If the driver of the cable has not been installed on your PC yet, a dialog
box will appear. Please follow the instructions.
NOTE
The “Hardware Installation” dialog box as shown below may appear
during installing the USB driver depending on the security level of
Windows
®
. Click [Continue Anyway] to start installing the driver. When
installation is completed, click [Finish].
