RECHARGEABLE TOUCH DIMMER LIGHT
PELL0017
Please read these instructions carefully before use and retain for future reference.
•
Avoid locations of high temperature or humidity.
•
On initial use, charge the batteries using the USB socket and USB lead supplied until
the red charge indicator turns blue.
•
For indoor use only.
IMPORTANT SAFETY INFORMATION
INSTALLATION
•
Slot the two self adhesive mounting pads into the keyhole slots on the back of the
light, remove the protective tape then offer the lamp up to the surface where required
and press it gently into place.
•
Unhook the light and press the mounts firmly onto the surface then refit the light.
•
Alternatively drill two holes the wall 243mm apart horizontally in the required location
with regard to any concealed wiring or pipework, use wall plugs if required and screw
in two dome head screws leaving the heads 4mm proud of the surface.
•
Locate the keyhole slots in the back of the light unit over the screw heads and ensure
the light is securely fixed.
•
Set the function switch to either ON or AUTO mode.
