The Stealth 28 HTBT
User’s Guide
COMPONENTS
* 1 Stealth 28 HTBT
* 3 Pairs silicon tips (S,M,L)
* 4 Pairs foam tips (XS,S,M,L)
* Carry case
* USB-C charging cable
Pro Ears Amplification & Protection Devices
Improve Hearing amplifying what you want to hear and filtering out noise.
Thank you for choosing the Stealth 28 HTBT.
We at Pro Ears strive to provide our customers with quality products at an
affordable price. If for any reason you are not satisfied please contact us and we
will be happy find a solution.
Please read this User Guide carefully before use.
You’ll find instructions on the use and care of your electronic ear buds.
* * *
FITTING INSTRUCTIONS
NOTE:
ALWAYS TEST FIT EARTIP WITH
THE SOUND TURNED OFF
1.
Select one of the enclosed ear tips based on size of ear canal and
intended purpose of use. The foam tips are intended for maximum
hearing protection and isolation. The silicone tips are primarily for
listening to media or phone calls. You may need to experiment with each
size ear tip to find the most comfortable and secure fit.
2.
Select the proper size ear tip to fit your ear canal. Use the largest size
that fits comfortably for most protection. The ear tip should form a
complete seal blocking out sound. This is critical to achieve the highest
NRR rating and protect your hearing.
3.
Grip the unit by the ear hooks in both hands. With the controls behind the
head, gently extend the cables until the ear hooks are over the ears. Place
the tips into the ear with a gentle rocking motion until the tips are fully
inserted into the canal.
4.
Test for fit with earphone turned off. Clap your hands and listen to the
sound level. If the ear bud tips are the correct size and properly inserted
ambient sound should be significantly muted. If not, repeat steps 1-3 with
an alternative size ear tip.
Turning the Unit On and Off
1. Press the POWER ON/OFF BUTTON for 3 seconds to turn the unit on.
A voice prompt will indicate POWER ON. The LED will flash blue 3
times to indicate both Bluetooth and Hear through are powered on.
2. The unit automatically enters pairing mode and the LED will flash
red & blue alternately.
3. Go to your Bluetooth settings on your phone. Scan and select
"Stealth 28 BT". Once connected the voice prompt will indicate
"connected" and the LED will turn blue.
OPERATING INSTRUCTIONS
POWER ON/OFF
BUTTON
AMPLIFICATION VOLUME
BUTTON
BLUETOOTH
VOLUME UP
BLUETOOTH
VOLUME DOWN
4. If a Bluetooth connection is not identified in 5 minutes the indicator
light will flash blue every 3 seconds and the Stealth 28 HTBT will be
in hear through mode only. This will conserve battery power.
5. To turn Bluetooth pairing on while the unit is in hear through only
mode double tap the POWER ON/OFF BUTTON.
6. Press the POWER ON/OFF BUTTON for 3 seconds to turn the unit off.
The LED will flash red 3 times and a voice prompt will indicate POWER OFF
Bluetooth Controls
To Make Calls
1. Tap POWER ON/OFF BUTTON once to pick up or end calls.
2. Tap POWER ON/OFF BUTTON twice to redial last incoming or outgoing
number.
3. When there is another incoming call during another call, tap POWER
ON/OFF BUTTON once to end original call and pick up incoming call.
Tap POWER ON/OFF BUTTON twice to put original call on hold and
receive incoming call. Tap POWER ON/OFF BUTTON twice to alternate
between the two calls.
For Media
1.Tap POWER ON/OFF BUTTON once to play/pause music.
