background image

Pro24.z

Quick Reference Guide

Installing and Recharging the Battery

The Pro24.z uses a Lithium-Ion rechargeable battery that does not exhibit any type of “Memory Effect” from being charged 

too often. The remote features convenient USB recharging capability, giving you even more control over how and where you 

choose to recharge the remote’s battery.  

 

The Pro24.z comes equipped with:

• One (1) standard USB programming cable (one Type A USB end and one micro USB end) 

• One (1) micro USB-powered recharging cradle

• One (1) 5VDC universal AC adapter (integrated micro USB cable)

• Four (4) interchangeable AC adapter plugs for international applications

To recharge the Pro24.z follow either one of the methods listed below. 

NOTE: 3rd party AC Adapter cables may not fit properly and 

could result in damage to the unit.  Only use the supplied 

cable.

Method A

   • Insert the 

micro USB end

 of the AC Adapter cable into the USB  

      port located on the bottom-side of the remote control unit.

   • Plug the AC Adapter into a wall outlet.

   • The Charging LED on the bottom of the unit will flash while the    

      battery is charging, and it will solidly illuminate when the 

      charging cycle is complete.

          

Method B

   • Place the Pro24.z in the recharging cradle.

   • Insert the 

micro USB end

 of the AC Adapter cable into the USB  

      port located on the topside of the recharging cradle.

   • Plug the AC Adapter into a wall outlet.

   • The Charging LED on the bottom of the unit will flash while the   

      battery is charging, and it will solidly illuminate when the charging    

      cycle is complete.

          

OR

To Wall Outlet

To Wall Outlet

Pro24.z Recharging 

Cradle

IR LED emitters 

and IR Learning 

Photodiode

240 X 320 pixel TFT 

LCD touchscreen

Programmable 

5-way joystick

Programmable 

“hard buttons” for 

tactile control of 

commonly used 

functions

Charging LED

USB  Port

Power Switch

Lithium-Ion 

Battery Pack

Battery Lock

Access Door

A

B

Programmable

“soft buttons” for 

custom touchscreen 

labeling

Follow the steps below to install/access the rechargeable 

Lithium-Ion battery.

1     Remove the access door from the rear of the 
       remote by sliding it down and off.
2     Orient the battery so that the charging contacts    

         

       point toward the top of the remote, and insert the battery 
       into the battery compartment.
3     Ensure that the battery’s charge contacts are 
       touching the charging pins inside the battery 
       compartment. 
    Press the battery down into the compartment until it  

        

       snaps and locks in place. Turn the unit on   

   

          

       by sliding the power switch located above the 
       battery compartment to the “ON” position.
5     The battery can be removed by pressing the battery  

        

       lock down and lifting the battery out of the battery     

       

       compartment. 

71-500000-13 V1.0

®

®

Get more control

®

 

Отзывы: