Pro.ircb.4
Quick Reference Guide
Installation & Operation
The Pro.ircb.4 IR port expander, when used with Pro Control processors,
provides reliable and convenient infrared expansion. With sturdy steel construction, the
Pro.ircb.4 is compatible with most industry-standard IR emitters, and is designed to
function without a power supply. A three foot (1 m) cable (with 3.5 mm plugs) for
connection to the ProLink processors is included.
NOTE:
• All four (4) IR output ports may not be usable if dual or flashing emitters are
used.
• The IR output level on the ProLink processor IR port should be set to
maximum.
• Simultaneously connecting different types or brands of IR emitters to the
Pro.ircb.4 output ports is not recommended.
The Pro.ircb.4 can be wall mounted (details below) or free standing.
Mounting Instructions
1
Level and anchor the Pro.ircb.4 to desired wall, shelf, or
cabinet by aligning the four (4) #10-32 3/4” flathead screws
(included) with the screw holes located on the front of the
Pro.ircb.4 mounting ears and securely fastening each screw.
2
When mounting the Pro.ircb.4, be certain to choose a safe
location (e.g. away from electrical junction boxes, circuit
breakers, wet locations, etc.).
Mounting
71-500009-22 V1.0
Mounting Holes (4)
Mounting Ears
IR In Port
IR Out Ports (4)
®
Get more control
®
®
4.5 Inches
(114.3 mm)
1.4 Inches
(35.56 mm)
