Pro Bike Tool Indoor Bike Rack – 6 Bikes Скачать руководство пользователя страница 1

1

P1

IMPORTANT - INSTALLATION

Please adhere to the below instructions to ensure warranty is not void.

Use correct bolts or screws, expansion anchors, electric tools and drill tool bits for installation.

DO NOT install the bike wall racks on unsupported wall surfaces e.g. plasterboard wall unless there is a strong 

wooden stud behind it.

ONLY install the bike wall racks on a solid stud, masonry or concrete wall. The bike wall racks are designed for use

Tools Required

Drill

Drill bit 8mm (0.3 in)

Hammer

a.  Aluminium Rail x 2

b.  Hook Cap-Upper x 6

c.  Hook Cap-Lower x 6

d.  Hooks x 6

e.  Hook Bolt x 6

f.   Extension Bolt x 4 

g.  Side Caps x 4

h.  Slot Washer x 4

i.    Cross Cap x 1 (use for extended rails only)

j.   Drills and Hooks Position Paper x 2

k.  Allen Key x 1

l.   Wood Screw x 8

m. Socket Wrench x 1

n.  Adaptor x 2

CAUTION!

It is important that the bike wall racks and accessories are properly and securely attached to the wall 

according to the instructions and only used for its predetermined purpose. Inspect the bike wall racks 

are installed correctly before hanging a bike. Failure to check that the bike wall racks have been 

installed correctly can result in possible bodily harm or bicycle damage. Periodic inspections for wear 

and tear of the bike wall racks and accessories are required. If any of the above requirements are not 

complied with when installing the bike wall racks, PRO BIKE TOOL shall not be liable or otherwise 

responsible for any damage to goods or injuries sustained because of incorrect or inappropriate 

installation of the bike wall racks.

The maximum weight that can be carried by the bike wall racks are specified in this instruction manual. 

DO NOT EXCEED the maximum allowable weight per bike to be carried by the bike wall racks. Be careful when 

walking around or under the bike wall racks when it is loaded to prevent bodily harm.

WARNING!

1

30 kg

66.2 lb

6

180 kg

398 lb

Your purchase comes with a lifetime warranty against manufacturer defects. To register and activate your 

warranty please visit : 

probiketool.com/warranty

Register your Lifetime Warranty

We are committed to customer satisfaction, so if you are not happy with your purchase, please contact us 

at 

[email protected]

 so that we can make it right. We pride ourselves in responding within 24 hours.

Not totally satisfied or need help?

Join our VIP Club to receive coupon deals and information on our new products 

probiketool.com/vip

VIP Club

To keep up to date with all the latest products, news and awesome deals from PRO BIKE TOOL, sign up for 

our newsletter at 

probiketool.com

, or follow us at:

Follow Us!

Twitter

@probiketool

Instagram

@probiketool

Facebook

facebook.com/probiketool

P8

Содержание Indoor Bike Rack – 6 Bikes









Отзывы: