Materials required for assembly
Page EN-12
Attaching the Exhaust hood
(10)
1. Screw the two round-head screws (10) for
hanging the Exhaust hood into the wall
plugs.
There must be enough space between
the wall and the heads of the screws so
that the Exhaust hood can be hung by the
keyhole openings.
(10)
2. Carefully hang the Exhaust hood on the
two round-head screws (10) using the
keyhole openings.
3. If necessary, remove the Exhaust hood
again and loosen or tighten the screws
in order to ensure that it is flush with the
wall. Please note: The Exhaust hood is
not yet secured against falling down.
(12)
4. Flip the cover (12) up.
(13)
(14)
5. Push back the lock (13) on the grease
filters (14) and carefully pull the grease
filters downwards to remove them.
2x
(11)
6. Turn two round-head screws (11)
into the prepared wall plugs to se-
cure the Exhaust hood, and screw the
Exhaust hood tightly to the wall.