Prinzen PSPC5, Руководство по обслуживанию, Страница: 48 / 73

PACKER
Page 48 of 73 SERVICE MANUAL PSPC5 SM-PSPC5-01-E/12-2007
VACUUM HEAD PICK UP
POSITION
Follow below steps to move the vacuum head
to the pick up position:
70. Set the clear button to 1
71. Start the system by pressing the start
button twice.
72. Place an egg onto the packer and wait
until the egg is transported towards
the end of the cup conveyor.
73. As soon as the vacuum head starts
moving towards the cup conveyor,
press the stop button.
74. The vacuum head stops at its pick up
position.
When the vacuum head is at the pick up
position, the tip (75) of the suction cup should
be at the same height as the end of the slots
(76) in the cup.
TIP!
For the explanation how to change the pick up
position, see the user manual.
VACUUM HEAD TRAY SET
POSITION
Follow below steps to move the vacuum head
to the tray set position:
70. Set the clear button to 1
71. Start the system by pressing the start
button twice.
72. Place an egg onto the packer and wait
until the egg is transported towards
the end of the cup conveyor.
73. As soon as the vacuum head picks up
the egg and starts moving towards
tray, press the stop button.
74. The vacuum head stops at its tray set
position.
The tray set position should be checked with a
hatch tray.
When the vacuum head is at the tray set
position, the tip (77) of the suction cup should
be approximately 5 mm above the surface (78)
of the hatch tray.
TIP!
For the explanation how to change the tray set
position, see the user manual.
70
73
71
75
76
77
78