manualshive.com logo in svg

Printronix SLPA7000e, Руководство по обучению и справочное руководство

Поделиться
Скачать
Printronix SLPA7000e Скачать руководство пользователя страница 4

IMPORTANT WARRANTY INFORMATION

PRINTER WARRANTY

Printronix

® 

warrants to purchaser that under normal use and service, this printer (excluding the 

thermal printhead) purchased hereunder shall be free from defects in material and workmanship 
for a period of ninety (90) days from the date of shipment from Printronix.

Consumable items such as media and ribbons are not covered under this warranty. This warranty 
does not cover equipment or parts that have been misused, altered, or used for purposes other 
than those for which they were manufactured. This warranty also does not cover loss, shipping 
damage, damage resulting from accident or damages resulting from unauthorized service.

THERMAL PRINTHEAD

Printronix warrants the printhead for a period of one hundred eighty (180) days, or 1,000,000 linear 
inches for direct thermal use, or 2,000,000 linear inches for thermal transfer use, whichever comes 
first. The warranty does not cover printheads that have been misused, damaged due to improper 
cleaning, or damaged due to use of improper ribbons or media.

SUPPLIES

For the nearest Printronix full-service distributor that carries Printronix genuine supplies, please 
call (800) 733-1900 or fax (714) 368-2354. Supplies design, specification, and selection are 
integral to the development of any computer imaging system. Printronix’s extensive manufacturing 
and research capabilities, along with years of experience in the design of printers and their 
applications, assures that you will receive the exact materials that you require to maximize the 
performance of your Printronix printer. For more information, call the Printronix Customer 
Solutions Center at (714) 368-2686 or access the Printronix website at http://www.printronix.com.

ON-SITE MAINTENANCE SERVICE

Printronix offers on-site support services in the United States. Please contact the Printronix 
Maintenance Contracts Group at (714) 368-2798 for detailed service agreement information.

COPYRIGHT 2005 PRINTRONIX, INC.

Содержание SLPA7000e













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды