manualshive.com logo in svg

Prinoth PANTHER T14R, Руководство по эксплуатации и техническому обслуживанию, Страница: 169 / 178

Поделиться
Скачать
Prinoth PANTHER T14R Скачать руководство пользователя страница 169

MISCELLANEOUS MAINTENANCE

Panther T14R - Operation and maintenance manual

169/178

DAILY AND WEEKLY OPERATOR VERIFICATION SCHEDULE

The tasks listed in the next table can be accomplished by the operator.

BEFORE ENGINE START 

AFTER ENGINE START 

 

SYSTEM

 

TASK WITH ENGINE OFF

 

DAILY

Every

 

50 hours

TRACKS

Check condition and wear (check wear indicators)

•

WHEELS, 

SPROCKETS 

& TENSIONERS

Grease track tensioner axles at grease fittings (release track tension before)

•

Check sprockets, wheels, idler wheels and top rollers for wear or damage

•

Check oil level in wheel hubs, idler wheel hubs and top roller hubs

•

Check the bolt torque of sprockets. Re-tighten if required

•

FUEL

Drain water accumulated in fuel filter/water separator

•

PLANETARY 

GEARBOXES

Check oil level

•

ENGINE

Check engine oil level

•

COOLING

Check engine coolant level, check radiators and oil cooler for leaks

•

Check engine radiator, oil cooler and grills for dirt and debris. Clean if required.

•

PUMP DRIVE

Check oil level

•

HYDRAULIC & 

HYDROSTATIC

Check oil level

•

CAB, COWLING,

DUMP BODY, 

SLEWING 

BEARING and 

FRAME 

Perform a visual inspection of cab & frame

•

Check level of windshield washer fluid 

•

Check if access panels are secure

•

Lubricate all grease points

•

Check presence of the escape tool, fire extinguisher, first aid kit and emergency 
drive module in the cab. Ensure they are in operating condition.

 

Ensure the safety rod of the dump body is in its stowing position.

•

 

SYSTEM

 

TASK WITH ENGINE RUNNING

 

DAILY

Every

 

50 hours

BRAKES

Check parking/emergency brake button operation (check icon on display when 
applying brake)

•

FUEL

Check fuel level on LCD display main screen, refuel if required

•

DEF/AdBlue®

Check DEF/AdBlue® level on LCD display main screen, refill if required

•

OTHER

Check LCD display for warning messages or other indications. Check backup alarm.

•

Содержание PANTHER T14R



















































































































































































Отзывы:

Нет отзывов