Printed in USA 10/10 © 2010
4
542-517revC-EN
Product Holding Bin
DHB2PT Series
Operation (continued)
MENU
ENTER
BK
REG
TRANSFER
To change a menu selection for a specific pan cavity, use the following steps:
7
A. Press and hold the PRINCE CASTLE LOGO button for 6 seconds. All
Pan displays will show
PROG
. All LED Timers will be RED.
B. Press and hold the MENU/ENTER button. The display next to the
MENU/ENTER button will display the product choices. While holding
the MENU/ENTER button, press the UP or DOWN Arrow button to
scroll through the product choices. While scrolling, the BKFT LED will
be lit for the breakfast menus and the REG LED will be lit for the
regular menus.
C. Press a PAN button to change the product. the LED timer will change
to yellow and the display will change from
PROG
to the assigned
product choice and two other displays will change to up and down
arrows and ENTR.
D. Press the UP or DOWN Arrow
button to scroll to the desired
product choice.
E. Press the MENU/ENTER button
to select the product choice.
F. Repeat Steps A – E as required for other Pan displays. Press the PRINCE
CASTLE LOGO button to exit the Program Mode.
NOTE: Up to six products may be programmed for each Pan button (1 for
each menu). In addition, a pan may be set as “not used” by assigning “----” as
its product.
To shut down the unit, turn the power On/Off switch to OFF.
8
Cleaning
Before performing any maintenance, turn the power switch to the
OFF position and unplug the power cord from the electrical
receptacle.
This unit is not watertight. Do not clean with a water jet/jet spray.
Do not immerse the unit in water.
1. Turn the unit off and unplug the power cord from the electrical
receptacle.
2. Remove the pan covers and pan racks. Wipe all parts and unit with
a damp cloth. DO NOT use a green Scotch Bright pad cleaner, ice
or water.
WARNING
CAUTION
