Primex XR Classic Series, Инструкция по установке

Страница: 39 / 46

Pressing the
button...
Running Mode Halted Mode
RESET
SET/CHANGE
Ignored Ignored
STOP/START
INCREMENT
Halts the code blue event count at the moment the button is
pressed.
Ignored
Elapsed Timer Operation
A Primex Elapsed Timer is a multi-function device that can operate as digital clock displaying its synchronized time, and a timer
with both count up and count down options. When in a count mode, it accurately counts up or counts down to a maximum of
99 hours, 59 minutes, and 59 seconds. The 3 button Timer Switch Control allows a user to start, stop, pause and reset the timer,
and set its start time. When not in a count mode, the timer displays its synchronized time.
Specifications
l
When power is first applied it enters clock mode, displaying its synchronized time.
l
Count Up and Count Down events are triggered by the use of the timer switch control; allowing a user to control events and
also set a count event start time.
l
Elapsed Timer has three operating modes that are controlled by the timer switch control.
Clock Mode Count Up Mode Count Down Mode
10:45
02
Displays current time
0.0:00
00
Decimal lit after the 10 hr digit
99:59
59
.
Decimal lit after the 1 sec digit
l
Count Down event can count down from 99:59:59 (99 hours, 59 minutes, 59 seconds). When 00:00:00 is reached, the timer
display flashes every second and emits an audible beep for 3 seconds.
39