3.
Slide the dual clock bracket over the four tabs on the mounting plate. A tap with a rubber mallet on the clock bracket may be
required to set the clock bracket assembly fully into place.
4.
Examine the mounting plate to ensure the bracket is fully engaged. The small hole in top side of the mounting plate should be
visible and fully exposed. To increase the security of the clock assembly, a common screw may be inserted into the hole and
screwed into the wall.
Step 2 - assemble clocks to bracket
Complete the steps below to assemble the clocks to the bracket.
1.
Apply power to the clock.
2.
Press and release the button located on the back of each clock to initiate its check-in to your OneVue account and synchronize its
time with its NTP time source.
3.
Place the clock in to the bracket housing with the 10/11 and 4/5 numerals over the metal posts.
19
