Primex OneVue Sync Levo C2005 Скачать руководство пользователя | Manualshive

Страница: 28 / 30

background image

REGULATORY APPROVALS

FCC Compliance

FCC Compliance Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Primex might cause
harmful interference and void the FCC authorization to operate this product.

FCC Radio Frequency Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

• Reorient or relocate the receiver’s antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued appliance, any changes or modifications not expressly approved by the party responsible for
compliance could voice the user's authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your
body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Page 28

«
...
26
27
28
29
30
»

Содержание OneVue Sync Levo C2005































Отзывы:

Нет отзывов

Похожие инструкции для OneVue Sync Levo C2005

Бренд: Technoline Страницы: 2

Бренд: Max Страницы: 25

Hello Kitty KT2089

Бренд: Spectra Страницы: 3

Бренд: Hama Страницы: 63

Nixie Large Tube Clock

Бренд: Pvelectronics Страницы: 31

Бренд: Canon Страницы: 4

Бренд: Asap Страницы: 3

Бренд: Silvercrest Страницы: 200

Бренд: Explore Scientific Страницы: 64

Бренд: Explore Scientific Страницы: 68

MUSICAL WAKE UP

Бренд: Chicco Страницы: 32

EZ Wake SunRise

Бренд: BioBrite Страницы: 2

Бренд: ALGE-Timing Страницы: 40

Бренд: Hama Страницы: 9

Бренд: TFA Страницы: 3

Бренд: TFA Страницы: 2

Fischer 1434U-22

Бренд: Ambient Weather Страницы: 3

AV:Link 421.785UK

Бренд: Avsl Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды