6
Input terminals of the PV inverter apply only to input terminals of PV String; do not
connect any other DC source to the input terminals.
Before connecting PV modules, ensure that is its voltages is within the safe range;
when exposed to any sunlight, PV modules can generate high voltage.
All electrical connections must meet the electrical standards of the country or region.
Cables used in electrical connections must be well fixed, good insulation, and with
appropriate specification.
DANGER
While the inverter operating, high voltage can lead to an
electrical shock hazard, and even cause personal casualties.
Therefore, operate the PV inverter strictly according to the
safety precautions in the user manual.
1.5
Operating and Commissioning
Before getting the permission of electrical power sector in the country / region, the
grid-tied PV inverter cannot start generate power.
Follow the procedures of commissioning described in the user manual when
commissioning the PV inverter.
Do not touch any other part’s surface except the DC switch when the PV inverter is
operating; its partial parts will be extremely hot and can cause burns.
DANGER
Power OFF all electrical terminals before the inverter
maintenance; strictly comply with the safety precautions in this
document when operating the inverter.
1.6
Maintenance
For personal safety, maintenance personnel must wear appropriate personal
protective equipment (like insulation gloves and protective shoes) for the inverter
maintenance.
Place temporary warning signs or erect fences to prevent unauthorized access to the
maintenance site.
Follow the procedures of maintenance stipulated in the manual strictly.
Check the relevant safety and performance of the inverter; rectify any faults that may
compromise the inverter security performance before restarting the inverter.
1.7
Additional Information
NOTICE
To avoid any other unforeseeable risk, contact PrimeVOLT
immediately, if there is any issue found during operation.