Primes HP-MSM-HB, Оригинальное руководство пользователя

Страница: 28 / 149

28
Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
X
Insert the adapter into the connector of the water
pipe.
Adapter
X
Insert the adapter into the absorber.
The connections at the HP-MSM-HB are intended for PE-hoses with a diameter of 12 mm (respectively
16 mm at HP-MSM-HB 20 kW). Connect the cooling circuit (inlet and return flow) to the water supply and
check if the hose connections are tight.
8.1.1 Water quality
NOTICE
Damage/Destruction of the device due to different chemical potentials
The parts of the device which get in contact with cooling water consist of copper, brass or
stainless steel. Connecting the unit to a cooling circuit containing aluminum components
may cause corrosion of the aluminum due to the different chemical potentials.
X
Do not connect the device on a cooling circuit in which aluminum components are installed.
• The device can be operated with tap water as well as demineralized water.
• Do not operate the device on a cooling circuit containing additives such as anti-freeze.
• Do not operate the device on a cooling circuit in which aluminum components are installed. Especially
when it comes to the operation with high powers and power densities, it may otherwise lead to corrosion
in the cooling circuit. In the long term, this reduces the efficiency of the cooling circuit.
• It is mandatory to use the installed interlock. Otherwise the device will be damaged in case of cooling
fails.
• Large dirt particles or teflon tape may block internal cooling circuits. Therefore, please thoroughly rinse
the system before connecting it.