TX150 S5
Options Guide
31
6
Accessible drives
V
CAUTION!
Observe the safety instructions in the
chapter “Safety notes” on page 13
et seq. .
Three 5.25-inch bays and one 3.5-inch bay are available for accessible drives.
The top side bay is already equipped with a DVD/DVD-RW drive. The two lower
bays can also be used to install a hard disks extension box (only SAS base
units).
6.1
Installing an accessible 5.25-inch drive
The 5.25-inch drives available are magnetic tape drives and DVD/DVD-RW
drives. These drives can be installed in the two free 5.25-inch bays.
Ê
Open the server and remove the front cover or rack front cover as described
in the
chapter “Preparation” on page 19
et seq. .
I
New 5.25-inch drives are supplied without EasyClick rails. Before
installing a new drive you must therefore remove the EasyClick rails from
the dummy cover and mount the EasyClick rails on the new drive.
Figure 15: Removing the dummy cover
Ê
Press inward on the two metal tongues of the EasyClick rails (1) until the
locking mechanism disengages.
Ê
Remove the dummy cover from the mounting bay (2).
1
1
2
