PRIMERGY BX620 S3, Руководство пользователя

Страница: 236 / 287

236
Chapter 8 Hardware Configuration/Utilities
8.3.6 Advanced Adapter Settings Submenu
Performs detailed settings for HBA operations.
table: Items on the Advanced Adapter Settings Submenu
Item Setting Description
Execution Throttle • 256 (at the time of
purchase)
• 1
−
256
Specify the maximum number of commands
executed on any port. When the port reaches the
execution throttle, the Fast!UTIL utility does not
execute any new command until the execution of
the current command ends.
Note:
When connecting with the ETERNUS3000
or ETERNUS6000 series, set to "16".
Luns per Target (#Luns
(Range)) • 0 (0
−
0)
• 8 (0
−
7)
• 16 (0
−
15)
• 32(0
−
31)
• 64 (0
−
63)
• 128(0
−
127)
• 256 (0
−
255) (at the time
of purchase)
Specify the number of LUNs for each target.
Multiple LUN support is for the RAID storage unit
that generally maps drives through LUN. If
multiple LUN support is not required, set the
number of LUNs to "0".
Enable LIP Reset • No (at the time of
purchase)
• Yes
Determines the type to reset the loop initialization
process (LIP) when the OS starts the bus reset
routine.
• Yes
The driver starts global LIP resetting, and clears
the reservation of the target device.
• No
The driver starts global LIP resetting in the full
login mode.
Enable LIP Full Login • Yes (at the time of
purchase)
• No
Instructs the ISP chip to log in all ports again after
LIP.
Enable Target Reset • Yes (at the time of
purchase)
• No
Enables the driver to issue the Target Reset
command to all devices on the loop when the SCSI
Bus Reset command was issued.
Qlogic Fast!UTIL Version n.nn
Use <Arrow keys> to move cursor, <Enter> to select option, <ESC> to backup
Advanced Adapter Settings
Selected Adapter
Adapter Type I/O Address
QLA23nn 9n00
Execution Throttle: 256
Luns per Target: 256
Enable LIP Reset: No
Enable LIP Full Login: Yes
Enable Target Reset: Yes
Login Retry Count: 8
Port Down Retry Count: 45
Link Down Timeout: 45
Extended Error Logging: Disabled
RIO Operation Mode: 0
Interrupt Delay Timer: 0