PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 40 / 143

40
Chapter 4 Web UI
• Domain Name Server
Domain Name Server (DNS) is set on the Domain Name Server page.
• HTTP
Port number is set on the HTTP page.
Changes to port settings will make valid 10 seconds after the changes.
• Telnet
Port number and Drop Time settings are set on the Telnet page.
The change to the Telnet port number becomes valid after rebooting the Management
Blade.
• NTP
The enabling/disabling of settings and NTP server settings are performed on the NTP page.
Display/Parameter Description
DNS Server 1
Sets the IP address of the primary DNS server.
DNS Server 2 Sets the IP address of the secondary DNS server.
Display/Parameter Description
Port Sets the port number of the HTTP interface.
Default value:80
Display/Parameter Description
Port
Sets the port number of telnet.
Default value:3172
Drop Time Sets the amount of time (secs) until a hibernating Telnet connection automatically
disconnects.
This can be set within the range of 30–65535 seconds. If set to 0 the automatic
disconnection function is disabled.
Also, the set value will be the same as the "Management Agent Timeout (Sec)" on
the CLI.
Display/Parameter Description
NTP Sets whether to perform time synchronization in the Management Blade using
Network Time Protocol (NTP). If NTP is enabled, the time of the Management
Blade is synchronized with the NTP server every 15 minutes.
• enable: use NTP.
• disable: do not use NTP.
Local NTP Server 1
Sets the IP address of the primary NTP server.
Local NTP Server 2 Sets the IP address of the secondary NTP server.