background image

     

2 Outlet Wall Tap with Wireless Charger

Wall Tap Instructions:

1.  Plug the wall tap into a properly grounded outlet. Connecting this product to an improperly grounded 
  outlet will void all warranties.
2.  The wall tap is now providing power.
3.  Make sure electronic devices are turned off before plugging them in .

High Speed Wireless Charging:

-  Check your phone manufacturer’s specifications to ensure your phone is capable of wireless charging
-  Center your phone on the Wireless Charging Dock, laying on it’s side with the phone screen facing out
-  A green indicator light will illuminate to let you know your phone is charging
-  If a device is placed on the wireless charger that is not capable of wireless charging, or if the phone 
  is incorrectly placed, the indicator light will flash letting you know to remove or shift the device.
-  If your device is not charging:

-  Try charging without your phone case to ensure the case is not interrupting the charge
-  Confirm the Wireless Charging Dock is plugged into a working outlet by trying the AC outlets 

  or USB outlets for output

-  Move your phone slightly left or right to make sure the charging receptacle in your phone is centered 

  on the wireless charger

Warning:

 Do not place metallic objects in between your phone and the Wireless Charging Dock and avoid 

using cases that contain metal, as this can cause unnecessary heat and damage the phone or cause burns.

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult with the dealer or an experienced radio/TV technician for help.

 Warning:

 Risk of fire or electric shock – Do not use in wet locations or with aquariums / 

  Use indoors only / Do not use in receptacles that are not properly grounded / Do not exceed electrical ratings 
  listed on product / Fully insert plug / Do not attempt to perform repairs yourself / Do not use with heaters or 
  heat producing devices

IC Regulatory Statement

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and 
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference 
to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power 
(e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following 
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, 
including interference that may cause undesired operation of the device.

Limited 5 Year Warranty:

Prime warrants to the original purchaser of any Prime wall tap for 5 years after purchase, that the wall tap 
shall be free from defects in design, material, or workmanship. Prime will correct defects in its wall taps by 
repair or replacement, at its option, if within fifteen (15) days of the discovery of the defect the wall tap is 
returned with proof of purchase, and it is deemed by Prime to be covered under the Limited Warranty, as 
outlined above. Please refer to http://www.primewirecable.com to read our complete safety instructions, 
warranty and claim procedures including maximum coverage and other limitations.

For additional assistance or information please call our customer service department, toll free, at 
1-888-445-9955 or visit our website at www.primewirecable.com 

Prime Wire & Cable, Inc. - 1330 Valley Vista Drive, Diamond Bar, CA 91765

rev 01-08212020

Отзывы: