Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
4
5/7
1
2
3
4
6
FEA-0019
ASSEMBL
Y INSTR
UCTIONS–RIGHT DRIVE SHAFT
: MOST CROSSB
ARS
RIGHT DRIVE SHAFT
ASSEMBLY SEQUENCE
REAR DRIVE SHAFT
EXCEPT 99.00” CROSSBAR SIZING
1.1
1.2
1.3
Torque to
90 in-lbs
NOTE:
Crossbars and RH Rotation feature
are shown for illustrative purposes only.
Crossbars and Rotations are not included
with this Drive Shaft feature, and must be
purchased separately.
NOTE:
Flow Control Screw
faces toward vehicle rear
NOTE:
HRR Drive Shaft
Housing Anchor must
face outward as shown.
1.4
Attach HHR Housing Anchor to Rear
Crossbar using indicated hardware.
Front Crossbar styles (interlocking and
non-interlocking) may vary per model.
For 99.00” Crossbar sizing, follow steps
1.1-1.5 on Pg. 5. For all other Crossbar
sizes, follow Steps 1.1-1.4 on Pg. 4.
