P r i m a L u c e L a b i S r l
S p i d e r 2 3 0 u s e r m a n u a l
Tighten first the two top screws for each half (the outer ones - photo below). As before, use the screws with bolts
but do not tighten completely, it will be necessary to tighten them later.
!
Then raise the parabolic antenna and, with the aid of a second person or a vertical table top, insert and tighten the
screws in the two holes for each ray to the center of the antenna.
!
!
p a g e
!
1 5
First, insert the
screws through
the 2 holes in
the outer radius
Put the screws
in these holes in
the next step
Insert 2 screws
through the
two holes in the
inner radius
