Unfold Platform Enclosure and slide it over the platform
Enclosure Roof Flex Poles and Enclosure Corner Posts
Pull the material down to the base of the platform assembly on
all sides, leaving the corner zipper open. Tie the Platform
Enclosure to the base of the Foot Platform assembly
(as shown Left and Below Left).
Enter enclosure through the corner zipper, unzip all 4 windows,
roll and tie each one down to Shooting Rail assembly. (As shown
Right and Above Right).
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
MODEL: PVTS-800
HOMESTEAD 7’ QUAD POD
ASSEMBLY INSTRUCTIONS PAGE 6
14
13
14
13
By attaching the Platform Enclosure to the
elevated platform, you are increasing the risk of
wind. Make sure Platform Stakes are used
correctly in final set up and installation.
W A R N I N G
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
2018
©2018 (rev. 3/18)
WWW.PRIMALTREESTANDS.COM
