1/5
th
M
EGA
T
RUCK
Choke Removal Instructions
(optional)
• Watch the instruction video at www.PrimalRC.com/Video/TruckInstructions
.
•
Loosen air filter clamp and slide air filter off.
•
Remove the two screws that are holding the choke system onto the carburetor. To prevent the carburetor from
falling off while you remove the screws, hold the carburetor in place.
•
Remove the choke plate and lever system and reinstall the velocity stack directly onto the carburetor using the
same two screws that you removed earlier, but install 2 additional lock washers on each bolt to act as spacers
and allow for proper tightening.
•
Reinstall the air filter and tighten the clamp.
Steering Servo Saver Adjustments
The steering system has both servos linked to an adjustable centralized servo saver system. This system helps
keep the servos from being damaged when force is put on the front wheels. You can adjust the sensitivity of the
system by loosening or tightening the large hex nut on the servo saver spring. Tightening the spring will allow
more control of the steering, however the servos will be more vulnerable to damage upon impact. Loosening the
spring will reduce steering control, but offer more protection for the servos. Finding the optimal ratio is a matter of
personal preference, so test different settings to find one that you prefer.
9
