1/5
th
M
EGA
T
RUCK
Radio Details
Bind/VCC
LED
Antenna
CH 1-6
Receiver
Battery
Compartment
Button
(Channel 3)
Throttle/Brake
(Channel 2)
Steering
D/R
Power Switch
BACK/Exit
BIND
LED Indicator
LCD
Channel 5
NaviKey
(Rotate to “Select”, press to
“Confirm”)
3 Position Switch
(Channel 4)
Steering Trim
(Channel 1)
Throttle Trim
(Channel 2)
Steering Wheel
(Channel 1)
Channel 6
Antenna
Transmitter
The transmitter and receiver have been pre-bound before delivery.
If you are using another transmitter or receiver. follow the steps below to bind the
transmitter and receiver:
1. Connect the bind cable to the receiver’s B/VCC port.
2. Connect power to any other port.
3. Pre
ss and hold the transmitter
’
s bind key and turn on the transmitter at the same time.
4. Once binding is complete the transmitter will exit bind mode. Remove the power and
bind cable from the receiver then apply power to the B/VCC port.
5. Check to make sure everything functions as expected. If not repeat the steps above.
Binding setup
6
