Using your Dream Player MC
PRICOM Design
Page 16
4.3 Control Output Configuration
Feature
Description
Control Start
The Control Output will become active when a track starts, and will
remain active for the length of time described in the Control Pulse
Time setting later in this section. Please note that this is only when the
track starts, it will not pulse when the track loops.
Control End
The opposite of Control Start, the output device will become active for
the specified amount of time
after
the file plays.
Control Play
The control output will simply stay active as long as the file is playing.
Control Loop
In the case of a looping track this setting will activate the control
output at the loop point, i.e. the end of the track.
Control Pulse Time
You may define exactly how long the output is active. Times may be
set either across all tracks or on an individual track basis. Times are
defined in Milliseconds, with 1000MS amounting to 1 full second, you
can set your output to pulse for just 1MS. If both Control Start and End
features are disabled then the pulse time is not used.
