PRG V476, Руководство пользователя

Страница: 295 / 444

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL 277
Command-Line Shortcuts
The command-line feature has several built-in shortcut and convenience capabilities which can be used to speed up
and simplify operations.
Some shortcuts have been indicated so far throughout the manual with the graphic shown to the left of this
text. These shortcuts, along with additional ones, are collected here.
Using [+] with [Store]
The [+] button can be used to increment the store target by a predetermined increment value (default = +1).
Using [+] with a +1 increment value:
+
Pressing [Store] [1] [Enter] will store Cue 1. Pressing [Store] [+] [Enter] will store Cue 2. Pressing [Store] [+] [Enter]
will store Cue 3, etc.
Using [+] with a +0.1 increment value:
+ Pressing [Store] [1] [Enter] will store Cue 1. Pressing [Store] [+] [.1] [Enter] will store Cue 1.1. Pressing [Store] [+]
[Enter] will store Cue 2.2, etc.
Note: The increment value is also displayed in the Encoders window. Refer to "Encoders HUD Window" on page 91.
[Store] [Store]
This command-line entry can be substituted for the standard cue store entry.
+
Press [n] [Store] [Store] to store Cue n.
Submaster Load
A cue specified at the keypad can be immediately loaded and played back in an empty submaster.
Step 1. At keypad press [cue number]. (Must be valid cue number.)
Step 2. At empty submaster press [Go] and then [Select].
Tip
Increment Value Indicator