PRG V476, Руководство пользователя

Страница: 155 / 444

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL 137
Storing, Modifying, and Recalling Presets
From Palettes
Store a new preset using Presets palette:
Step 1. Select required channels.
Step 2. Ensure Presets are selected on at least one palette. (Refer to page 130 .)
Step 3. Using manual controls, set all required parameters.
Step 4. Filter attributes as required using touchscreen display.
Step 5. Press and hold [Store] while pressing

Preset Palette Button

or [Store] / [Label] /

Preset Palette Button


xxxxxx

Enter/Accept

.
Store a new preset using command-line keypad:
Step 1. Select required channels.
Step 2. Using manual controls, set all required parameters.
Step 3. Filter attributes as required using touchscreen display.
Step 4. Press [Store] [Preset] [n] [Enter]
or
[Store] [Preset] [n] [Label]

xxxxxx

Enter/Accept

(where n is the discrete
Preset number).
Label an existing Preset palette:
When labeling, the name can be entered on the console touchscreen keyboard
or
computer keyboard.
Step 1. Ensure Presets are selected on at least one palette. (Refer to page 130 .)
Step 2. Press and hold [Label] while pressing any Preset bank, page, or palette button.
Step 3. Enter alpha/numeric label.
Add new channels to a Preset:
If a Preset is already stored, the [Store] command can add new channels to that Preset, provided those channels are
selected. If the channel already has data for the Preset, that data will be overwritten with current data.
Step 1. Select required channels.
Step 2. Ensure Presets are selected on at least one palette. (Refer to page 130 .)
Step 3. Press and hold [Store] while pressing

Preset Palette Button

or
[Store] [Label] /

Preset Palette Button


xxxxxx

Enter/Accept

.
Modify parameters using Selective Store:
The Selective Store command modifies parameter data for selected channels as determined by any filter settings. For
more information, refer to
"Selective Store" on page 282.
Step 1. At touchscreen display, modify filter settings as required.
Step 2. Select required channels.
Step 3. Press and hold [Sel Store] while pressing

Preset Palette Button

or
[Sel Store] [Preset] [n] [Enter] (where n is
the discrete Preset number).
Update a preset:
The [Update] command does not add channels, but modifies any stored data that has been changed by manual
control for channels and parameters associated with that Preset. It does not route through the filter settings. For more
information, refer to
"Update" on page 280.
Step 1. Make changes by manual control.
Step 2. Press and hold [Update] while pressing

Preset Palette Button

or
[Update] [Preset] [n] [Enter] (where n is
the discrete Preset number).