PREVOST X3-45 COMMUTER 2018, Руководство оператора, Страница: 89 / 172

OTHER FEATURES 5-19
PA1633 X3-45 Commuter Operator’s Manual
•
Trip duration while engine rpm is greater than the desire maximum rpm
RPM Limit set in Fleet Limits sub-menu (hours)
•
Trip fuel used with engine rpm greater than the economy rpm
(gallons/liters)
•
Trip average speed (mph, km/h)
•
Trip duration with speed greater than the maximum desired speed as set
in Fleet Limits sub-menu (hours)
•
Trip engine hours
•
Trip duration on engine idle (hours)
•
Trip fuel used while in engine idle (gallons, liters)
4. Reset Trip Data
This menu can only be accessed if the correct password has been entered.
Use this function to reset measurements of the Trip Data menu before each
new trip or leg.
AFTERTREATMENT
This menu permits to the driver to initiate a stationary regeneration, to check the status of the
aftertreatment system and to interrupt regeneration.
1. Request Parked REGEN
Use this function to initiate a stationary (parked) regeneration.
2. ATS Status
The Aftertreatment status sub-menus provide information about the
conditions required for performing regeneration. The status can be OK
(regeneration allowed), CHECK (regeneration not allowed) or N/A (not
applicable). When ATS Status is selected, the following sub-menus are
available.