INSTRUCTIONS
Pack Contents
Carefully check the
contents, which are:
EnvirON SWITCH 125
This manual
SWITCH 125
The following table lists some common problems. In addition, there are a series of informative videos on how
to set up the
EnvirON
product range on Pretorian Technologies’ website. Please use the following QR code, or
navigate to the
EnvirON
Remote product page.
If, once you have been through this table and reviewed the videos, you still experience
difficulties, please contact your local distributor or Pretorian Technologies directly.
Troubleshooting
Symptom
Possible Cause
Remedy
The
EnvirON
range of environmental controls
provides disabled and elderly users with a unique,
flexible approach to controlling their environment.
EnvirON Switch 125 provides a method to control
mains-powered† as well as infra-red devices* such
as TVs and radios. Because
EnvirON Switch 125
is a
wireless device it does not suffer from the
directional behaviour of infra-red systems,
allowing the user the freedom to place the switch
at any position to achieve the most comfortable
and practical configuration.
EnvirON
Hub then
converts the wireless signals into infra-red.
Because
EnvirON Switch 125
is a single,
stand-alone switch it is very straightforward to
use, which is a great benefit to users with learning
difficulties. Having a single switch to put the TV
onto the user’s favourite channel is cognitively
straightforward and the availability of the unit in
several colours helps to differentiate between
switches should there be several in the
configuration.
Product Description
Features
• Can be used to control mains powered†
and infra-red* devices
• Can also control doors, windows, curtains
and locks with suitable hardware.
• Large 125mm (5”) operating area
• Choice of colours
• Low operating force
• 10m (32’) operating range
• Long battery life
• Easily mounted via industry-standard
fixing holes.
†Requires iClick to work with mains powered devices. *Requires EnvirON Hub to work with infra-red devices.
Switch does not function
when pressed
• Battery flat
• Switch is not paired
• Mode is set to Off Only (24)
• Replace with two good quality
AAA sized batteries
• Pair switch with receiver
• Only use this mode if there is
a corresponding switch set to
On Only (23)
Switch turns on mains
powered device on iClick
but will not turn it
off again.
• Mode is set to a long
timed period.
• Mode is set to On Only (23).
• Review Mode setting and
change as appropriate.
• Review Mode setting and
change as appropriate
Switch carries out the
wrong action on the TV
• Mode is set incorrectly
• Check that Infra-Red Chart is
up to date (using Test on Hub
for example).
• Review Infra-Red Chart and
select the correct Code,`
making sure that the switch’s
Mode corresponds
Switch works
intermittently
• Batteries may be getting flat
• Switch and receiver out
of range
• Replace with two good quality
AAA sized batteries.
• Move closer to receiver.
Unit 37 Corringham Road Industrial Estate
Gainsborough Lincolnshire DN21 1QB United Kingdom
Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992
www.pretorianuk.com
EnvirON is a registered trademark of Pretorian Technologies Ltd
Refers to firmware version 83.0 onwards
S040114
