ROADRUNNER 380
©2021 Prestigio
18
WARNING!
Before formatting, make sure that all important files have been moved to another
storage medium. Once formatted, they cannot be recovered.
Reset Settings
Allows you to set the initial settings of the system. All user-defined values will be restored to
defaults.
Software version
Displays the software version of the device.
License plate
Allows you to enter the license plate number of your vehicle into the memory of the device.
2.6 Working with cameras
Connecting the cabin camera
The RoadRunner 380 comes with
The interior camera is designed to record what happens inside
the vehicle.
To connect it, you need to insert the plug of the camera into the connector for the cabin
camera.
Display modes
The following camera display modes are available: Main camera, Cabin camera, or a
combination of both. Video is recorded from two cameras simultaneously, regardless of the
selected display mode. Press the [▲] button to switch modes.
2.7 Recording video
Automatic video recording
Connect the device to the car charger. When you start the car engine, the device will
automatically turn on and start cyclic video recording.
When you turn off the engine, the DVR will save the last recorded file and stop working. Thanks
to the built-in battery, an automatic shutdown, depending on the settings, is available in
10/15/60 seconds.
Recording a video file in manual mode
In recording mode, press [OK] to stop/continue recording.
Recording a protected video file
To protect the currently recording file from being overwritten, press the [M] key.
2.8 File Management
File view mode
To select the file view mode, you must stop recording by pressing [OK], then press [M]. Use the
[▲]/[▼] buttons to move between files. Press [OK] to start watching the selected file. Press the
[M] button to exit viewing mode.
