ROADRUNNER 380
©2021 Prestigio
16
IMPORTANT!
•
The device cannot record video footage or photos without a memory card.
•
The memory card should only be installed when the power is off. When using the device for
the first time, format the memory card to FAT32 (read open sources on how to do this).
•
Use only tested and recommended memory cards. Otherwise, the manufacturer does not
guarantee correct operation of the device.
2.4 Starting the DVR
1.
Connect the car charger with micro-USB cable (included) to the micro-USB power connector
of the DVR.
2.
Connect the charger to a vehicle power source (cigarette lighter socket in the car).
3.
Once connected to a car power source, the DVR will automatically turn on and start recording
video.
4.
To stop the video recording, press the [OK] button.
5.
Press the power button to turn the device off.
2.5 Configuring the DVR
Set up the device according to your requirements before shooting video.
To access the settings menu, stop recording (recording starts automatically when the power is
connected) by pressing [OK], then press [≡]. Use the [▲]/[▼] buttons to navigate in the menu.
To activate changes, make and confirm new settings, press the [OK] button. To continue
recording, press [≡] twice and then press [OK].
The following video recorder settings are available
Resolution
Allows you to select the resolution/quality of the recorded video file. Available options: FHD/HD.
Cyclic recording
Allows you to set the duration of each video recording. When the micro-SD card is full, the old,
unprotected entries will be replaced with new files. The following values are available: 1/3/5 min.
or off.
