Prestigio BHF200, Руководство пользователя

Страница: 6 / 9

3. Device Pairing
1. Press and hold Volume Down button for 5
seconds to enter pairing mode.
2. Release the button when the Bluetooth LED
starts to flash repeatedly with beeping sound.
NOTE :
The device will automatically enter standby mode
when pairing process exceeds 2 minutes. Restart
the process if necessary.
3. Connect Prestigio Bluetooth Car Kit to
desired mobile phone. Refer to mobile phone
manual for further instructions.
4. When pass key is prompted, please enter 0000
on the mobile phone to ensure encrypted
connection.
4. General Operations
1. Turning power ON/OFF

Press and hold the Multi-Function Button for 2 seconds to turn on the device.

Press and hold the button again for 5 seconds to turn off the device.
2. Reconnecting device to mobile phone
Short-press Multi-Function Button to reestablish connection when it is interrupted.
3. Disconnecting the device from mobile phone
Press and hold both Volume Control Buttons simultaneously for 1 second to disconnect the
device from mobile phone. The function is only available when there is no activity between
devices.
4. Receiving calls / Ending calls / Voice Dial

Short-press the Multi-Function Button to answer a call.

Press and hold the Multi-Function Button for 2 seconds to end a call.

Short-press the Multi-Function Button to start voice dialing when the device is in idle
mode.
5. Transferring calls

Short-press the Multi-Function Button 2 times to transfer an existing phone call from
mobile phone to Prestigio Car Kit .

Short-press the button again 2 times to transfer the existing phone cal back to mobile
phone.
6. Rejecting calls
Press and hold the Multi-Function Button to reject an incoming call without answering it.
7. Redialing from last phone number
ENG - 6