128-9451
Page 1
1 2
Lock Button
Press once to lock and arm alarm.
Single Beep Tone Will Be Heard.
Press and hold 3 seconds for panic
alarm where applicable.
Unlock Button
Press once to unlock and disarm alarm.
Double Beep Tone Will Be Heard.
Press and hold 3 seconds for panic
alarm where applicable.
Trunk / Start Button
Press two times in succession to
start vehicle. When Starting Or Shutting Down
A Start or Stop Melody Will Be Heard
Press and hold for 3 seconds for Trunk release.
Press and release to activate
option 1 device where added.
OPTION 1
Press and release to activate
option 1 device where added.
OPTION 2
Model PE2LED
Operators Manual
RF Upgrade Kit
PATENTED: www.voxxintl.com/company/patents
Check with your installation center for features and functions operational on your system.
To Operate System:
1) Press the lock button to lock the doors and arm the alarm if installed. The LED alongside the
lock button will flash and the transmitter will beep once when the vehicle receives and responds
to the command.
2) Press the unlock button to unlock the doors and disarm the alarm if installed. The LED along-
side the unlock button will flash and the transmitter will beep twice when the vehicle receives and
responds to the command.
3) Press and hold the Trunk/Start button for 3 seconds to unlock the trunk. The LED alongside
the button will flash when the vehicle receives and responds to the command.
4) Press the Trunk/Start button two times in succession to start the vehicle a melody will sound
upon start. The vehicle will start and run the predetermined time set up during installation (5 to
60 minutes selectable). During this run cycle, the LED alongside the button will flash 1 time every
10 seconds indicating the vehicle is in fact running.
Anytime during the run cycle, enter the vehicle by first unlocking the doors with your transmitter,
insert your key and turn it to the run, NOT START, position, then step on the brake, the vehicle is
now in control of the ignition key the transmitter will sound a shut down / owner take over melody.
NOTE:
For push to start vehicle systems, simply enter the vehicle with your key in hand, and
step on the brake.
